Chain conveyor JPT CC 200-500
The JPT CC conveyors have a capacity of 5–400 m³/h and their length can be varied according to the project. The chain conveyors’ surface treatment: powder coated, galvanized or stainless steel
1. Bottom 3 mm + low friction and wear-resistant plastic 10 mm
2. Side panels 3 mm
3. Intermediate bottom 3 mm + low friction and wear-resistant plastic or, alternatively, supporting rolls
4. Cover 2 mm, either flat or ridged
5. Also Heavy Duty models available
Chain options include a flat chain with welded flights or a drop forged chain with plastic flights or steel flights. The standard lengths of the elements are 2.4 m or 1.2 m, but they can be manufactured according to customer specifications. Each element has an inspection window or hatch. The elements are attached together with bolted joints, floor support spacing is approx. 3 m (maximum 4.8 m).
The drive side chain wheel is made of wear-resistant steel. The drive motor is a helical gear motor, which has a direct drive on the shaft. The chain can also be tightened at the drive side and at the return end. The drive side has a flow monitor that can be used either as a peak period monitor or flow monitor, or both simultaneously.
Screw conveyor JPT SC / JPT SCP 80-300
The JPT SC/SCP screw conveyors have a capacity of 5–100 m³/h. Lengths vary according to specifications. Screws longer than 4 m are supplied equipped with intermediate bearings. A pipe or a trough acts as the conveyor body. The surface treatment: powder coated, galvanized or stainless steel, depending on the requirements of the project.
The screw conveyors have a service hatch as well as a helical gear motor, the size of which is determined by capacity and length. The JPT SC/SCP screw conveyors are equiped with flange-mounted bearings. The screw conveyors can be equipped with a sealing box and overfilling detector as option.