Chain conveyor

Chain conveyors for moving grains, mashed feed, pellets and wood chips

JPT CC 200–1100 conveyors have a capacity of 5–800 m³/h and their length can be varied according to the project. The materials used are galvanised, powder coated or stainless steel. The bottom and intermediate bottom are made from wear-resistant steel.

Chain options include a flat chain with welded flights or a drop forged chain with plastic flights or steel flights. The standard lengths of the elements are 2.4 or 1.2 metres, but they can be manufactured according to individual customer specifications. Each element has an inspection window or hatch. The elements are attached together with bolted joints, and the floor support spacing is approximately 3 metres (maximum 4.8 metres).

The drive side chain wheel is made of wear-resistant steel. The drive motor is a helical gear motor, which has a direct drive on the shaft. The chain can also be tightened at the drive side and at the return end. The drive side has a flow monitor that can be used either as a peak period monitor or a flow monitor or both simultaneously.

The tension station’s chain wheel is made of wear-resistant steel. The tension station also has a chain tensioner, and a rotation guard and cleaning head that can be adjusted according to the chain are also available.

Sectors:

 

 

 

 

 

 

Technical specifications

  • Bottom: t=3 mm Hardox + Hardox wear rail
  • Side panels: t=3 mm
  • Intermediate bottom: t=3 mm Hardox + Hardox wear rail
  • Cover: t=2 mm, either flat or ridged
  • Chain wheels: Hardox 400
  • Chain with welded flights + cleaning flights every 1 m
  • Material options: galvanised steel, RST, HST